members_in_bending_not_certified#

Autogenerated DPF operator classes.

class ansys.dpf.core.operators.result.members_in_bending_not_certified.members_in_bending_not_certified(time_scoping=None, field_yield_strength=None, class_cross_section=None, streams=None, data_sources=None, partial_factor=None, mesh=None, bending_moment_y=None, bending_moment_z=None, config=None, server=None)#

This operator is a non-certified example of buckling resistance verification for the bending members. It is only provided as an example if you want to develop your own compute norm operator. The results computed by this beta operator have not been certified by ANSYS. ANSYS declines all responsibility for the use of this operator. HATS Beam and irregular beams (unequal I-Beam, not- square Channel-Beam, not-square Angle L-beam, unequal hollow rectanglar beam) not supported.

Parameters
  • time_scoping (Scoping or int, optional) –

  • field_yield_strength (Field) – This pin contains field of beam’s yield strength defined by the user.

  • class_cross_section (bool) – Selection for a cross-section. true: class 1 or 2 cross-sections. false: class 3 cross section. if the user defines the cross section as class 1 or 2, the section modulus would be plastic section modulus. if it’s class 3- cross section,the section modulus would be elastic section modulus

  • streams (StreamsContainer, optional) – result file container allowed to be kept open to cache data.

  • data_sources (DataSources, optional) – Result file path container, used if no streams are set.

  • partial_factor (float) – Partial safety factor for resistance of members to instability assessed by member checks. default value: 1.

  • mesh (MeshedRegion) – mesh containing beam’s properties defined by user

  • bending_moment_y (FieldsContainer) – Fields container of bending moment on axis y defined by user

  • bending_moment_z (FieldsContainer) – Fields container of bending moment on axis z defined by user

Examples

>>> from ansys.dpf import core as dpf
>>> # Instantiate operator
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> # Make input connections
>>> my_time_scoping = dpf.Scoping()
>>> op.inputs.time_scoping.connect(my_time_scoping)
>>> my_field_yield_strength = dpf.Field()
>>> op.inputs.field_yield_strength.connect(my_field_yield_strength)
>>> my_class_cross_section = bool()
>>> op.inputs.class_cross_section.connect(my_class_cross_section)
>>> my_streams = dpf.StreamsContainer()
>>> op.inputs.streams.connect(my_streams)
>>> my_data_sources = dpf.DataSources()
>>> op.inputs.data_sources.connect(my_data_sources)
>>> my_partial_factor = float()
>>> op.inputs.partial_factor.connect(my_partial_factor)
>>> my_mesh = dpf.MeshedRegion()
>>> op.inputs.mesh.connect(my_mesh)
>>> my_bending_moment_y = dpf.FieldsContainer()
>>> op.inputs.bending_moment_y.connect(my_bending_moment_y)
>>> my_bending_moment_z = dpf.FieldsContainer()
>>> op.inputs.bending_moment_z.connect(my_bending_moment_z)
>>> # Instantiate operator and connect inputs in one line
>>> op = dpf.operators.result.members_in_bending_not_certified(
...     time_scoping=my_time_scoping,
...     field_yield_strength=my_field_yield_strength,
...     class_cross_section=my_class_cross_section,
...     streams=my_streams,
...     data_sources=my_data_sources,
...     partial_factor=my_partial_factor,
...     mesh=my_mesh,
...     bending_moment_y=my_bending_moment_y,
...     bending_moment_z=my_bending_moment_z,
... )
>>> # Get output data
>>> result_buckling_resistance_bending_yy = op.outputs.buckling_resistance_bending_yy()
>>> result_buckling_resistance_bending_zz = op.outputs.buckling_resistance_bending_zz()
static default_config(server=None)#

Returns the default config of the operator.

This config can then be changed to the user needs and be used to instantiate the operator. The Configuration allows to customize how the operation will be processed by the operator.

Parameters

server (server.DPFServer, optional) – Server with channel connected to the remote or local instance. When None, attempts to use the the global server.

property inputs#

Enables to connect inputs to the operator

Returns

inputs

Return type

InputsMembersInBendingNotCertified

property outputs#

Enables to get outputs of the operator by evaluationg it

Returns

outputs

Return type

OutputsMembersInBendingNotCertified

property config#

Copy of the operator’s current configuration.

You can modify the copy of the configuration and then use operator.config = new_config or create an operator with the new configuration as a parameter.

Returns

Copy of the operator’s current configuration.

Return type

ansys.dpf.core.config.Config

connect(pin, inpt, pin_out=0)#

Connect an input on the operator using a pin number.

Parameters
  • pin (int) – Number of the input pin.

  • inpt (str, int, double, bool, list of int, list of doubles,) –

    Field, FieldsContainer, Scoping, ScopingsContainer, MeshedRegion,

    MeshesContainer, DataSources, Operator, os.PathLike

    Object to connect to.

  • pin_out (int, optional) – If the input is an operator, the output pin of the input operator. The default is 0.

Examples

Compute the minimum of displacement by chaining the "U" and "min_max_fc" operators.

>>> from ansys.dpf import core as dpf
>>> from ansys.dpf.core import examples
>>> data_src = dpf.DataSources(examples.multishells_rst)
>>> disp_op = dpf.operators.result.displacement()
>>> disp_op.inputs.data_sources(data_src)
>>> max_fc_op = dpf.operators.min_max.min_max_fc()
>>> max_fc_op.inputs.connect(disp_op.outputs)
>>> max_field = max_fc_op.outputs.field_max()
>>> max_field.data
array([[0.59428386, 0.00201751, 0.0006032 ]])
eval(pin=None)#

Evaluate this operator.

Parameters

pin (int) – Number of the output pin. The default is None.

Returns

output – Returns the first output of the operator by default and the output of a given pin when specified. Or, it only evaluates the operator without output.

Return type

FieldsContainer, Field, MeshedRegion, Scoping

Examples

Use the eval method.

>>> from ansys.dpf import core as dpf
>>> import ansys.dpf.core.operators.math as math
>>> from ansys.dpf.core import examples
>>> data_src = dpf.DataSources(examples.multishells_rst)
>>> disp_op = dpf.operators.result.displacement()
>>> disp_op.inputs.data_sources(data_src)
>>> normfc = math.norm_fc(disp_op).eval()
get_output(pin=0, output_type=None)#

Retrieve the output of the operator on the pin number.

To activate the progress bar for server version higher or equal to 3.0, use my_op.progress_bar=True

Parameters
  • pin (int, optional) – Number of the output pin. The default is 0.

  • output_type (ansys.dpf.core.common.types, optional) – Requested type of the output. The default is None.

Returns

Output of the operator.

Return type

type

static operator_specification(op_name, server=None)#

Put the grpc spec message in self._spec

property progress_bar: bool#

With this property, the user can choose to print a progress bar when the operator’s output is requested, default is False

run()#

Evaluate this operator.

class ansys.dpf.core.operators.result.members_in_bending_not_certified.InputsMembersInBendingNotCertified(op: ansys.dpf.core.dpf_operator.Operator)#

Intermediate class used to connect user inputs to members_in_bending_not_certified operator.

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> my_time_scoping = dpf.Scoping()
>>> op.inputs.time_scoping.connect(my_time_scoping)
>>> my_field_yield_strength = dpf.Field()
>>> op.inputs.field_yield_strength.connect(my_field_yield_strength)
>>> my_class_cross_section = bool()
>>> op.inputs.class_cross_section.connect(my_class_cross_section)
>>> my_streams = dpf.StreamsContainer()
>>> op.inputs.streams.connect(my_streams)
>>> my_data_sources = dpf.DataSources()
>>> op.inputs.data_sources.connect(my_data_sources)
>>> my_partial_factor = float()
>>> op.inputs.partial_factor.connect(my_partial_factor)
>>> my_mesh = dpf.MeshedRegion()
>>> op.inputs.mesh.connect(my_mesh)
>>> my_bending_moment_y = dpf.FieldsContainer()
>>> op.inputs.bending_moment_y.connect(my_bending_moment_y)
>>> my_bending_moment_z = dpf.FieldsContainer()
>>> op.inputs.bending_moment_z.connect(my_bending_moment_z)
property time_scoping#

Allows to connect time_scoping input to the operator.

Parameters

my_time_scoping (Scoping or int) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.time_scoping.connect(my_time_scoping)
>>> # or
>>> op.inputs.time_scoping(my_time_scoping)
property field_yield_strength#

Allows to connect field_yield_strength input to the operator.

This pin contains field of beam’s yield strength defined by the user.

Parameters

my_field_yield_strength (Field) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.field_yield_strength.connect(my_field_yield_strength)
>>> # or
>>> op.inputs.field_yield_strength(my_field_yield_strength)
property class_cross_section#

Allows to connect class_cross_section input to the operator.

Selection for a cross-section. true: class 1 or 2 cross-sections. false: class 3 cross section. if the user defines the cross section as class 1 or 2, the section modulus would be plastic section modulus. if it’s class 3- cross section,the section modulus would be elastic section modulus

Parameters

my_class_cross_section (bool) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.class_cross_section.connect(my_class_cross_section)
>>> # or
>>> op.inputs.class_cross_section(my_class_cross_section)
property streams#

Allows to connect streams input to the operator.

result file container allowed to be kept

open to cache data.

Parameters

my_streams (StreamsContainer) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.streams.connect(my_streams)
>>> # or
>>> op.inputs.streams(my_streams)
property data_sources#

Allows to connect data_sources input to the operator.

Result file path container, used if no streams are set.

Parameters

my_data_sources (DataSources) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.data_sources.connect(my_data_sources)
>>> # or
>>> op.inputs.data_sources(my_data_sources)
property partial_factor#

Allows to connect partial_factor input to the operator.

Partial safety factor for resistance of members to instability assessed by member checks. default value: 1.

Parameters

my_partial_factor (float) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.partial_factor.connect(my_partial_factor)
>>> # or
>>> op.inputs.partial_factor(my_partial_factor)
property mesh#

Allows to connect mesh input to the operator.

mesh containing beam’s properties defined by

user

Parameters

my_mesh (MeshedRegion) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.mesh.connect(my_mesh)
>>> # or
>>> op.inputs.mesh(my_mesh)
property bending_moment_y#

Allows to connect bending_moment_y input to the operator.

Fields container of bending moment on axis y defined by user

Parameters

my_bending_moment_y (FieldsContainer) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.bending_moment_y.connect(my_bending_moment_y)
>>> # or
>>> op.inputs.bending_moment_y(my_bending_moment_y)
property bending_moment_z#

Allows to connect bending_moment_z input to the operator.

Fields container of bending moment on axis z defined by user

Parameters

my_bending_moment_z (FieldsContainer) –

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> op.inputs.bending_moment_z.connect(my_bending_moment_z)
>>> # or
>>> op.inputs.bending_moment_z(my_bending_moment_z)
connect(inpt)#

Connect any input (an entity or an operator output) to any input pin of this operator.

Searches for the input type corresponding to the output.

Parameters

inpt (str, int, double, Field, FieldsContainer, Scoping,) –

DataSources, MeshedRegion, ScopingsContainer, CyclicSupport,

…, Output, Outputs, Operator, os.PathLike

Input of the operator.

class ansys.dpf.core.operators.result.members_in_bending_not_certified.OutputsMembersInBendingNotCertified(op: ansys.dpf.core.dpf_operator.Operator)#

Intermediate class used to get outputs from members_in_bending_not_certified operator.

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> # Connect inputs : op.inputs. ...
>>> result_buckling_resistance_bending_yy = op.outputs.buckling_resistance_bending_yy()
>>> result_buckling_resistance_bending_zz = op.outputs.buckling_resistance_bending_zz()
property buckling_resistance_bending_yy#

Allows to get buckling_resistance_bending_yy output of the operator

Returns

my_buckling_resistance_bending_yy

Return type

FieldsContainer

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> # Connect inputs : op.inputs. ...
>>> result_buckling_resistance_bending_yy = op.outputs.buckling_resistance_bending_yy()
property buckling_resistance_bending_zz#

Allows to get buckling_resistance_bending_zz output of the operator

Returns

my_buckling_resistance_bending_zz

Return type

FieldsContainer

Examples

>>> from ansys.dpf import core as dpf
>>> op = dpf.operators.result.members_in_bending_not_certified()
>>> # Connect inputs : op.inputs. ...
>>> result_buckling_resistance_bending_zz = op.outputs.buckling_resistance_bending_zz()